Skip to content
Track-TILLr-Manual-125-026-01
Zea Disclaimer & FAQs
5 TT TRACK TILLr® Operator’s Manual
More
5 TT TRACK TILLr® Operator’s Manual

icon picker
PREPARATION AND SETUP

IMPLEMENT COMPONENT IDENTIFICATION


⁠
Load content from app.zea.live?
Loading external content may reveal information to 3rd parties. Learn more
Allow
⁠
⁠
5TT TRACK TILLr Component Identification
Item
i
Part Name
Description
1
1
RECESSED-BEARING GUIDE WHEEL
Centers the machine on the pivot track and controls tillage depth.
2
2
SIDE WALL BUSTERS
22” notched discs take down the side wall and fill the pivot track.
3
3
TRACK PACKER
Optional tooling used to pack the soil in the pivot track to create a solid base.
4
4
ANGLE-ADJUSTABLE REAR DISC GANGS
Feathers soil evenly in and around the previous pivot track.
5
5
REAR DUAL ROLLING BASKETS
Optional tooling to enhance soil conditions and leave a final smooth soil surface.
6
6
HYDRAULIC HOSE STORAGE
Storage plate for hydraulic hoses that coincide with the optional hydraulic angle adjustment.
7
7
HYDRAULIC ANGLE ADJUSTMENT
Optional tooling to allow operator to make easier adjustments to the rear disc gang angle to adapt to changing soil and pivot track conditions.
8
8
MANUAL ENCLOSURE
A safe place to store the implement operator’s manual. Always keep the operator’s manual with the implement.
There are no rows in this table
⁠

PREPARING THE IMPLEMENT

⁠
@READ AND UNDERSTAND THE ENTIRE CONTENT OF THIS MANUAL BEFORE OPERATING OR SERVICING IMPLEMENT.
⁠
Tooling options available for added TRACK TILLr® versatility are illustrated and explained in the tooling options section of this manual. Field adjustments are illustrated and explained in the field settings section of this manual.
Before each use, check hardware for wear and proper torque. Replace damaged or missing hardware with hardware of an identical grade to restore implement to original specifications.

IMPLEMENT
SMV SIGN ASSEMBLY
⁠
⁠

Due to shipping requirements, Orthman must ship all units with the SMV sign mounted down. It is the dealer/customer’s responsibility to properly remove and re-mount the SMV sign to the track tiller frame in the upward and rear-facing orientation in order to comply with local laws.

IMPLEMENT TO TRACTOR CONNECTION

error

⁠
@AVOID CRUSHING.
⁠

Make sure all personnel are clear of the implement. Lower implement to the ground, place tractor in park, turn off engine, and remove key.
Do not stand between tractor and implement when connecting or disconnecting implement. Injury or death can result from being trapped between the tractor and implement.
AVOID CRUSHING. Make sure all personnel are clear of the implement. Lower implement to the ground, place tractor in park, turn off engine, and remove key.

CONNECT TRACTOR 3-POINT HITCH TO IMPLEMENT HITCH POINTS

error

⁠
@USE BAR STANDS AND CYLINDER STOPS TO SUPPORT THE IMPLEMENT.
⁠

Position the rear of the tractor in front of the TRACK TILLr®.
Attach tractor 3-point draft links and center link to the implement hitch points. Refer to your tractor’s operator’s manual for information on tractor 3-point hitch.

FIELD OPERATION

error

⁠
@AVOID CRUSHING.
⁠

Be sure the weight of the machine in fully supported by the tractor.

⁠
@USE BAR STANDS AND CYLINDER STOPS TO SUPPORT THE IMPLEMENT.
⁠

PLACE TRACTOR IN PARK AND REMOVE KEY BEFORE DISMOUNTING TRACTOR TO ADJUST IMPLEMENT.

⁠
@NEVER ALLOW RIDERS ON TRACTOR OR IMPLEMENT.
⁠

⁠
@PRACTICE SAFE MAINTENANCE
⁠

PLACE IMPLEMENT IN “FIELD READY” POSITION. MAKE NECESSARY ADJUSTMENT TO IMPLEMENT BY FOLLOWING ADJUSTMENT PROCEDURES IN THIS MANUAL. BELOW ARE ADJUSTABLE COMPONENTS OF THE IMPLEMENT.
⁠
Load content from app.zea.live?
Loading external content may reveal information to 3rd parties. Learn more
Allow
⁠
⁠
5TT TRACK TILLr Field Adjustments
Item
i
Part Name
1
1
ROLLING BASKET DOWN PRESSURE
2
2
SIDE WALL BUSTER WIDTH
3
3
GUIDE WHEEL DEPTH
4
4
TRACK PACKER DEPTH AND DOWN PRESSURE
5
5
REAR DISC GANG ANGLE
There are no rows in this table
⁠



IMPLEMENT COMPONENT IDENTIFICATION
5TT TRACK TILLr Component Identification
PREPARING THE IMPLEMENT
IMPLEMENT SMV SIGN ASSEMBLY
IMPLEMENT TO TRACTOR CONNECTION
AVOID CRUSHING.
CONNECT TRACTOR 3-POINT HITCH TO IMPLEMENT HITCH POINTS
USE BAR STANDS AND CYLINDER STOPS TO SUPPORT THE IMPLEMENT.
FIELD OPERATION
AVOID CRUSHING.
USE BAR STANDS AND CYLINDER STOPS TO SUPPORT THE IMPLEMENT.
NEVER ALLOW RIDERS ON TRACTOR OR IMPLEMENT.
PRACTICE SAFE MAINTENANCE
5TT TRACK TILLr Field Adjustments
Load content from app.zea.live?
Loading external content may reveal information to 3rd parties. Learn more
Allow
Want to print your doc?
This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
CtrlP
) instead.