Skip to content
Track-TILLr-Manual-125-026-01
Zea Disclaimer & FAQs
5 TT TRACK TILLr® Operator’s Manual
More
5 TT TRACK TILLr® Operator’s Manual

icon picker
MAINTENANCE

Torque-Tension Specification Reference Guide

Lubrication

Grease - use high quality multi-purpose grease.
Follow recommended 50 hour service interval illustrated below.
⁠
Load content from app.zea.live?
Loading external content may reveal information to 3rd parties. Learn more
Allow
⁠
⁠

Implement Inspection

When replacement parts are necessary for periodic maintenance and servicing, genuine factory replacement parts must be used to restore implement to original specifications. Replace broken or worn parts immediately. Contact your Orthman dealer for replacement parts.
During break-in (40 hours), check hardware for proper torque every 10 to 20 hours.
Before each use, check hardware for wear and proper torque. Replace damaged or missing hardware with hardware of an identical grade to restore implement to original specifications.
Do not allow debris to buildup on any surface of the implement.
Replace all shields and guards. Be sure all tools, parts, and service equipment are removed prior to transporting equipment.

Implement Storage

error

⁠
@PRACTICE SAFE MAINTENANCE
⁠

⁠
@AVOID CRUSHING.
⁠

Clean and touch up paint seasonally to avoid corrosion and rust. Contact your Orthman dealer for touch up paint.
Inspect all safety and Orthman decals and replace if missing or damaged. Contact your Orthman dealer for replacement decals.
Grease all zerks regardless of hourly interval prior to storage.
Check all hardware according to torque specifications prior to storage.
Replace all worn or damaged parts prior to storage.
Store inside if possible. Storing implement inside will prolong the life of the components.
Lubrication
Implement Inspection
Implement Storage
PRACTICE SAFE MAINTENANCE
AVOID CRUSHING.
Load content from app.zea.live?
Loading external content may reveal information to 3rd parties. Learn more
Allow
Want to print your doc?
This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
CtrlP
) instead.