Skip to content
Track-TILLr-Manual-125-026-01
Zea Disclaimer & FAQs
5 TT TRACK TILLr® Operator’s Manual
More
5 TT TRACK TILLr® Operator’s Manual

icon picker
INTRODUCTION

Product Overview
To The Dealer: Inspect the implement thoroughly after assembly to be certain it is functioning properly before delivering it to the customer. The following checklist is a reminder of points to cover. Check off each item as it is found satisfactory or after proper adjustment is made.

Pre-Delivery Checklist

All Hardware properly tightened.
Lubrication of grease fittings.
All decals properly located and readable
All implement tools and options are installed and set
Check overall condition of implement.
Make sure Operator’s manual is included.

Date Set Up:
Tue, May 16, 2023
⁠

Signature:
⁠

Delivery

Review the operator’s manual with the customer. Explain the following:
Introduce the machine to the customer. Give the customer this manual and encourage them to read it.
Make the customer aware of all the safety precautions that must be exercised when using and transporting this machine.
Make customer aware of the different tooling options available.
This machine does not come set to run in the field from the factory. The Field settings section in this manual is meant to help set the machine for optimal performance. Explain all operating adjustments.
Explain to the customer that the life expectancy of this machine depends on regular maintenance as directed in this manual.
Tell the customer to use the proper tools for service and make them aware of Orthman parts availability.
Write machine model number and serial number in the spaces provided below.

Date Delivered:
Tue, May 16, 2023
⁠
⁠

Signature:
⁠

Model Number:
Serial Number:


Warranty

Orthman warrants each new wholegood product to be free from defects in manufactured components and workmanship. This warranty is applicable only for the normal service life expectancy of the product or components, not to exceed twenty-four (24) consecutive months from date of purchase of the new Orthman product to the original purchaser.
Purchased components installed by Orthman (blades, bearings, controls, hoses, wheels, coulters, cylinders, fittings, etc.) shall be warranted by the respective manufacturer for a period of twelve (12) consecutive months from date of delivery of the new Orthman product to the original purchaser.
A completed online Warranty Registration for the original purchaser must be received by Orthman to activate warranty coverage. Non-receipt of warranty registration may void warranty coverage. The Orthman warranty is non-transferable.
Genuine Orthman replacement parts and components will be warranted for ninety (90) days from date of purchase, or the remainder of the original equipment warranty period, whichever is greater. All warranty work is to be performed by an authorized Orthman dealer at the repairing dealer’s location, unless otherwise approved by Orthman.
Under no circumstances, will this warranty cover any merchandise or component thereof, which, in the opinion of Orthman, has been subjected to misuse, unauthorized modifications or alteration, accident, collision with obstruction/ground, or if repairs have been made with parts other than those obtainable through Orthman.
Orthman warranty policies do not cover travel expenses, after-hours field/service time, overnight expenses, or expenses not related to regular shop labor rates or parts replaced during actual warranty repair. Orthman reserves the right to adjust warranty labor credits to believed normal repair times as directed by state law(s).
This warranty shall be limited to repairing or replacing, free of charge to the purchaser, any part, which Orthman’s judgment shows evidence of such defect.
Additionally, the defective part(s) shall be returned within thirty (30) days from the date of failure to Orthman through the dealer or distributor from whom the product was purchased or repaired; transportation charges prepaid.
This warranty shall not be interpreted to render Orthman liable for injury or damages of any kind or nature to person or property. This warranty does not extend to the loss of crops, loss of delay in harvesting/planting, or any expense or loss incurred for labor, substitute machinery, rental, or any subsequent reasons thereof.
Except as set forth above, Orthman shall have no obligation or liability of any kind on account of its equipment and shall not be liable for special or consequential damages. Orthman makes no other warranty, expressed or implied, and, specifically disclaims any implied warranty or merchantability or fitness for a particular purpose. Some states or provinces do not permit limitations or exclusions of implied warranties or incidental or consequential damages, so the limitations or exclusion in this warranty may not apply. This warranty is subject to any existing conditions of supply, which may directly affect ability to obtain materials or manufacture replacement parts.
Orthman reserves the right to make improvements in design or changes in specifications at any time, without incurring any obligation to owners of units previously sold; to include, but not limit to engineering prototype machines. No one is authorized to alter, modify, or enlarge this warranty nor the exclusions, limitations, and reservations.
Orthman provides this manual without warranty of any kind, expressed or implied. This manual reflects the product at the time of publication. All information within is based upon current information on the publication date. Orthman assumes no responsibility for damages incurred due to the use of the illustrations, information, and specifications within this publication.
Pre-Delivery Checklist
Delivery
Warranty
Want to print your doc?
This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
CtrlP
) instead.